• Calacatta Oro Infinity porcelain slab on a kitchen island with light wood cabinetry

    Marble-Look Calacatta Porcelain for Kitchen Countertops and Islands

Across American kitchens, the countertop has become the first thing a room says. The veining is back at the center of the design, and so is the island, now the place where the house gathers. That raises a project question before an aesthetic one: where does the vein fall, how does it turn the corner, how does it hold across a surface the length of an island?

The answer starts from the slab.

Marble-look Calacatta porcelain slabs are large-format engineered surfaces that interpret the veining of Calacatta marble for Calacatta porcelain countertops and islands. Infinity slabs, made in Italy, measure 160 x 320 cm (63½” x 127½”) in 6, 12 and 20 mm (¼”, ½”, ¾”) thicknesses, are suitable for food contact and, in the Natura-Vein Tech versions, carry the vein through the full 20 mm (¾”) thickness.

SpecificationInfinity marble-look porcelain
Format160 x 320 cm (63″x127″)
Thicknesses6 mm (¼”) · 12 mm (½”) · 20 mm (¾”)
Composition100% natural minerals, free of glues and resins, sintered at 1,230 °C (2,246 °F)
Veining technologyNatura-Vein Tech: through-body vein in 20 mm (¾”) on Calacatta Magnifico and Calacatta Hermitage
Marble-look surfacesCalacatta Oro · Calacatta Glory · Calacatta Magnifico · Calacatta Hermitage · Calacatta Viola · Calacatta Brasile · Arabescato Diva · Arabescato Nabuk
FinishesSatin · Levigato Pearl · Polished (availability varies by surface)
In the kitchenSuitable for food contact · resistant to liquids and acids · scratch and abrasion resistant · very low water absorption · color-stable · easy to clean
DocumentationGREENGUARD Gold · EPD · Declare label · ISO 14001, ISO 45001, ISO 17889-1 · EcoVadis · LEED
OriginDesigned and produced in Italy by Infinity, part of Concorde Group

Why marble-look porcelain is shaping the 2026 kitchen

In 2026, U.S. kitchen design has moved the countertop to the center of the room. Expressive veining, waterfall islands, warm gold tones and matte finishes lead the direction, and marble-look porcelain slabs answer it with the large format, Calacatta and Arabescato interpretations, and two matte finishes of Infinity’s own, Satin and Levigato Pearl.

In NKBA’s 2026 Kitchen Trends Report, 57% of professionals expect new statement colors to land on the island, second only to the backsplash. The design press reads the island the same way: the social center of the home, often ending in a waterfall edge that carries the surface to the floor, with mirror gloss giving way to matte surfaces that feel tactile and lived-in. This is where large-format porcelain slabs earn their place. A single 160 x 320 cm (63½” x 127½”) slab covers a full island top in one piece, and the finish can be chosen for touch as much as for light.

Infinity does not imitate matter, it designs it. Each marble-look surface has a name, a character, and a defined set of finishes and thicknesses for the kitchen. What follows reads as a material library for the island.

The Calacatta language: choosing the veining for the project

Infinity interprets Calacatta marble in six large-format porcelain surfaces, from the milky white of Calacatta Brasile to the purple veining of Calacatta Viola, and adds two Arabescato interpretations: the golden veining of Arabescato Diva and the sculptural relief of Arabescato Nabuk. Choosing among them is a design decision: the veining sets the tone of the island and, through it, of the whole room. Infinity’s mimesis is not a reproduction of nature but a research into what can be perfected, and each marble-effect porcelain surface has its own reading in the kitchen.

SurfaceGround and veiningHow it reads in the kitchenFinishesThicknesses
Calacatta Oro (MB06)Warm white ground, balanced golden veining and a calm color compositionThe warm classic: a full perimeter, or the gold accent of a two-tone kitchenPolished, Satin¼’’, ½’’, ¾’’
Calacatta Glory (MB07)White ground, fine gray veining, refined and harmoniousThe kitchen of light: luminous island or quiet perimeterPolished, Satin¼’’, ½’’, ¾’’
Calacatta Magnifico (MB16)Dense gray veining on a white ground, a graphic drawingThe island as a drawing; edges with a through-body veinPolished, Satin · Natura-Vein Tech in Satin (20 mm – ¾”)¼’’, ½’’, ¾’’
Calacatta Hermitage (MB17)Ivory base and bold veins in warm tones, a Neo-Baroque characterThe expressive island in a warm palettePolished, Satin, Natura-Vein Tech (20 mm – ¾”)¼’’, ½’’, ¾’’
Calacatta Viola (MB22)Warm white ground, intense purple veining with golden nuancesThe statement islandPolished, Levigato Pearl¼’’, ½’’
Calacatta Brasile (MB27)Milky-white ground, fine flowing veiningPurity and delicacy for the quiet perimeter or a soft islandSatin¼’’, ½’’, ¾’’
Arabescato Diva (MB29)Light ground, golden veining; homage to an iconic Italian marbleThe island with movement, warm and graphicPolished, Satin, Levigato Pearl¼’’, ½’’
Arabescato Nabuk (MB30)Light oval forms and deep, branching blue-grey veins; relief, tactile surfaceThe sculptural counterpoint: island sides, feature wall or tabletopFull Grain¼’’, ½’’
Close-up of a Calacatta Glory Infinity porcelain countertop with fine gray veining
Calacatta Glory, kitchen countertop detail.

Luminous white, soft veining: Calacatta Glory and Calacatta Brasile

Calacatta Glory brings the aesthetic perfection of white marble to a refined, harmonious surface: a white ground with fine gray veining that keeps the kitchen luminous. Calacatta Brasile answers with a milky-white ground crossed by fine, flowing veins, where purity and graphic delicacy meet in a quiet balance. Brasile is produced with High Fidelity-Tech, the Infinity technology that engraves the texture into the material so that detail is perceived by the eye and by the hand, and comes in Satin only: a luminous island in Glory, or the calm perimeter of a two-tone scheme in Brasile.

Gray and gold veining: Calacatta Magnifico

Calacatta Magnifico Infinity porcelain kitchen countertop and wall, The Paddock apartment, British Columbia
Calacatta Magnifico, kitchen at The Paddock, British Columbia. Design Justin Tse, fabrication FLOFORM Countertops.

Calacatta Magnifico is the aesthetic that has always been selected for exclusive projects, with gray and gold veining on a bright white ground that reads as a drawing across the slab and adds elegance to a classic or a contemporary interior. In 20 mm (¾”) it is produced with Natura-Vein Tech in Satin finish, so the vein runs through the full thickness and appears on the cut edge: the graphic island, where the vein is the composition.

In the project: in the renovated apartment at The Paddock condominium in British Columbia, Canada, designed by Justin Tse with kitchen design by Thomas & Birch and fabrication by FLOFORM Countertops, Calacatta Magnifico gives the kitchen its distinctive graphic drawing.

Warm gold veining: Calacatta Oro

Calacatta Oro Infinity porcelain slabs in the Presidential Suite of the Beverly Hilton, Beverly Hills
Calacatta Oro, Presidential Suite, Beverly Hilton, Beverly Hills. Renovation by Gensler.

A calacatta gold porcelain slab interprets Calacatta marble with warm golden veining on a white ground. Calacatta Oro is Infinity’s version: balanced veining and a calm color composition, in Polished or Satin and in all three thicknesses, with a book-matched composition available. It suits kitchens that prefer discreet warmth to contrast, in line with the 2026 move from cool gray-on-white toward warmer veining: a full perimeter in Satin, or the gold accent of a two-tone kitchen.

In the project: at the Beverly Hilton in Beverly Hills, Calacatta Oro was chosen together with Nero Marquinia for the Presidential Suite, in the renovation by Gensler that preserved the hotel’s Hollywood Regency character.

Bold, expressive veining: Calacatta Viola and Calacatta Hermitage

Calacatta Viola Infinity porcelain island and arched wall with intense purple veining
Calacatta Viola, statement island.

Calacatta Viola pairs a warm white ground with intense purple veining and golden nuances: perfection, personality and prestige in a slab that makes the difference, as a touch of flair in a minimal kitchen or a decorative element in a prestigious one. Calacatta Hermitage answers with an ivory base and bold veins in warm tones, a Neo-Baroque character that makes any room unique. Viola is produced in 6 and 12 mm (¼” and ½”), in Polished and, at 12 mm (½”), Levigato Pearl; Hermitage in all three thicknesses, in Polished and Satin, with a Satin version and a Natura-Vein Tech version in Polished and Satin at 20 mm (¾”). Both are the statement island of the 2026 kitchen, with the perimeter kept quiet so the veining does the talking.

In the project: in the new Kianawah Kitchen project in Brisbane, Australia, KINNDE STUDIO kept walls and cabinetry deliberately quiet and left the scene to a Calacatta Viola countertop cut from a single 160 x 320 cm (63½” x 127½”) slab, where the bordeaux and purple veining catches the raking light and changes through the day.

Beyond Calacatta: Arabescato Diva

Arabescato Diva Infinity porcelain slab with golden veining on a kitchen island and bar
Arabescato Diva, kitchen island.

Arabescato Diva pays homage to one of the most iconic Italian marbles, one whose selection is so rare that it is now extinct, and reinterprets it through Infinity’s latest technological developments, generating depth, continuity and light. A light ground with golden veining, in Polished, Satin or Levigato Pearl, in 6 and 12 mm (¼” and ½”), with a book-matched layering available, ideal to add movement and warmth to the composition.

New for Cersaie 2026, Arabescato Nabuk offers a contemporary reading of marbles with a strongly architectural character. Large light forms, crossed by deep, branching veins in grey-blue tones, evoke the Arabescato marbles of the Apuan Alps that defined the great Renaissance tradition, reinterpreted by Infinity with a high degree of technological precision. With the new Full Grain finish, the large-format surface gains a third dimension: the micro-structure comes into relief, turning the slab into a tactile and visual experience to explore, where shadows and plays of light follow the finish and accentuate its sculptural character. Available in 6 and 12 mm (¼” and ½”), it is designed for walls, tabletops and furniture, where the relief can be seen and touched.

Designing the marble-look island: one slab, one gesture

An island top that fits within 160 x 320 cm (63½” x 127½”) is cut from a single Infinity slab, with no seam across the surface. The design work is in the vein: where it falls along the island, whether it mirrors in a book-matched composition, and how it turns the corner on a waterfall edge.

Vein placement: planning where the vein falls

Vein placement deserves the same attention on marble-look porcelain as on stone. Before cutting, the designer and the fabricator lay out the top on the slab: the main vein is usually oriented along the long axis of the island, sink and cooktop openings are placed where the drawing is quieter, and the areas seen first, the end facing the living space and the waterfall side, receive the most expressive part of the veining. Infinity’s Project Division supports architects, designers and fabricators at this step.

Waterfall and mitered edges: the vein that turns the corner

Calacatta Magnifico Infinity porcelain kitchen countertop with gray and gold veining and a curved edge
Calacatta Magnifico, kitchen countertop.

A waterfall edge carries the surface from the top down the side of the island to the floor. It is built with a mitered joint: top and side panel are cut at 45 degrees and joined at the corner, so the drawing wraps around it and the island reads as one solid block. With Natura-Vein Tech, on Calacatta Magnifico and Calacatta Hermitage in 20 mm (¾”), the vein runs through the full thickness of the slab: the cut edge shows the same veining as the surface, which also allows a square, exposed edge with no miter at all.

Book-matched islands

Book-matched Calacatta Hermitage Infinity porcelain slabs with mirrored veining on a wall and counter
Calacatta Hermitage, book-match composition.

In a book-matched composition, two slabs mirror their veining across the joint, so a long island, or a top and its waterfall side, reads as a single symmetric drawing. Calacatta Oro, Calacatta Hermitage and Arabescato Diva are offered in a book-match composition.

The two-tone kitchen: statement island, quieter perimeter

 Calacatta Brasile Infinity porcelain kitchen island and perimeter in Satin finish
Calacatta Brasile, Satin finish.

The two-tone kitchen pairs an expressive island with a calmer perimeter. Done in one material, it keeps the room coherent: Calacatta Viola or Calacatta Hermitage on the island, Calacatta Brasile or Calacatta Glory on the perimeter, the same Satin touch on both. Where the palette turns warm, Calacatta Oro and Arabescato Diva work as the accent, surrounded by the warm neutral porcelain slabs of the open plan. The same slab can also rise behind the range as a full-height panel, a subject for a dedicated article.

Specifying the countertop: thickness and finish

For Calacatta porcelain countertops and islands, Infinity marble-look slabs are specified in 12 mm (½”) or 20 mm (¾”), depending on the surface and the profile. Satin is the finish Infinity recommends for kitchen tops; Levigato Pearl adds a completely matte, soft-touch surface; Polished brings the veining forward and is mainly used on wall coverings and furnishings.

 Thickness by surface

ThicknessSurfacesUse in the kitchen
12 mm (½”) — 12 mm porcelain thicknessAll eight surfacesCountertops and islands
20 mm (¾”) — 20 mm porcelain thicknessCalacatta Oro, Glory, Magnifico (Natura-Vein Tech), Hermitage (also Natura-Vein Tech), BrasileIslands with a solid edge; through-body vein on the Natura-Vein Tech versions
Up to 12 mm (½”)Calacatta Viola, Arabescato Diva, Arabescato NabukCountertops and islands in 12 mm

The 12 mm (½”) slab is the reference thickness for countertops. The 20 mm (¾”) slab gives a solid, visible edge and, on Calacatta Magnifico and Calacatta Hermitage, the through-body vein of Natura-Vein Tech. Calacatta Viola, Arabescato Diva and Arabescato Nabuk, produced in 6 mm  (¼’’) and 12 mm (½”), are specified in 12 mm (½’’) for the kitchen.

Choosing the finish

FinishCharacterWhere Infinity recommends it
SatinExclusive Infinity process; extremely soft to the touch, with surface irregularities almost imperceptible except in particular lightKitchen tops: technical performance with a natural, sophisticated aesthetic
Levigato PearlCompletely matte; the surface absorbs light and returns it as a subtle sheen; thin semicircular marks make each slab uniqueKitchen tops, tables and walls (not floors); cleaned with warm water and a neutral detergent, without alkaline degreasers or abrasive sponges
PolishedReflective surface obtained through progressive mechanical grindingMainly wall coverings and furnishing elements; the finish that lifts the veining

Following the latest trends, in a contemporary kitchen the choice usually reads like this: Satin or Levigato Pearl on the top, where the hand rests and glare would flatten the drawing; Polished on the waterfall side or the full-height panel, where light should move through the veining.

Invisible induction beneath the veining

In an Infinity kitchen the cooktop can ever disappear. With invisible induction, the induction elements sit beneath the slab and heat cookware through the porcelain surface, leaving a Calacatta top continuous and uninterrupted. The system is designed for interior kitchens and is the subject of a dedicated Infinity page.

Performance that protects the veining

Infinity slabs are made of 100% natural minerals, sintered at 2,246 °F and free of adhesives and resins. In the kitchen, a marble-look Infinity countertop is suitable for food contact, resistant to liquids and acids, scratch and abrasion resistant, resistant to heavy loads and easy to clean, with very low water absorption. Natura-Body Tech and Natura-Vein Tech keep surface and body coherent, so the veining stays what it was designed to be.

PropertyIn the kitchen
Suitable for food contactCountertops, islands and prep surfaces
Resistant to liquids and acidsEveryday kitchen use
Scratch and abrasion resistantDaily use of the top
Resistant to heavy loadsLong island tops
Very low water absorption – easy to cleanWarm water and a neutral detergent
Color-stable over timeThe veining does not change with light and use
Easy workabilityCutting and finishing by the fabricator

Documentation and indoor air quality

Infinity products carry GREENGUARD Gold certification, which attests the absence of harmful VOC (volatile organic compound) emissions: a reference for U.S. projects with indoor air quality requirements. 

Infinity also provides an EPD (Environmental Product Declaration), the Declare label, and management systems certified to ISO 14001, ISO 45001 and ISO 17889-1, with EcoVadis assessment and LEED documentation. 

Production is part of the story: 100% of production waste is reused in the process, 100% of process water is purified and reused, and 60% of the electricity consumed is generated by the Infinity plant. See details for Infinity sustainability and certifications.

Specifying Infinity marble-look porcelain in the U.S.

Infinity supports U.S. architects and designers from surface selection to specification. The Project Division provides technical and design consulting, slab customization with made-to-measure cuts, special finishes and exclusive details, and works with the fabricator on vein layout and edge detailing. Partner showrooms across the United States hold the marble-look range for viewing and sampling: use the Infinity store finder to locate the nearest one.

Key takeaways

  • Eight marble-look surfaces, from the luminous white of Calacatta Glory and Brasile to the bold veining of Calacatta Viola and Hermitage, plus Arabescato Diva and Arabescato Nabuk.
  • An island top within 160 x 320 cm (63½” x 127½”) is cut from one slab, with no seam across the surface; vein placement is planned on the slab with the fabricator.
  • Natura-Vein Tech, on Calacatta Magnifico and Hermitage in 20 mm (¾”), carries the vein through the full thickness, so the edge shows the same drawing as the top.
  • 12 mm (½”) is the reference thickness for countertops; 20 mm (¾”) gives a solid edge. Satin is the finish recommended for kitchen tops; Levigato Pearl is completely matte; Polished lifts the veining.
  • Suitable for food contact, resistant to liquids and acids, scratch and abrasion resistant, easy to clean; EPD, Declare label and ISO 17889-1 documentation for U.S. specifications.

FAQ – Frequently Asked Questions

  • What are marble-look Calacatta porcelain slabs

    Marble-look Calacatta porcelain slabs are large-format engineered surfaces that interpret the veining of Calacatta marble. Infinity produces them in Italy in 160 x 320 cm (63½” x 127½”), in 6, 12 and 20 mm (¼”, ½”, ¾”) thicknesses, for kitchen countertops, islands, walls and furniture.

  • Are Calacatta porcelain countertops suitable for kitchens?

    Yes. Infinity marble-look slabs are suitable for food contact, resistant to liquids and acids, scratch and abrasion resistant and easy to clean, and are specified for countertops and islands in 12 mm (½”) and 20 mm (¾”).

  • What is a calacatta gold porcelain slab?

    A calacatta gold porcelain slab interprets Calacatta marble with warm golden veining on a white ground. Infinity’s Calacatta Oro is a large-format example, in Polished or Satin finish and in 6, 12 and 20 mm (¼”, ½”, ¾”).

  • Does the veining continue on the edges of a porcelain island?

    On Calacatta Magnifico and Calacatta Hermitage in 20 mm (¾”), Natura-Vein Tech recreates the veining through the entire thickness of the slab, so surface and body show the same veining.

  • Can a porcelain kitchen island have a waterfall edge?

    Yes. The top and the side panel are cut at 45 degrees and joined at the corner, so the veining flows from the surface down to the floor and the island reads as one solid block. On the Natura-Vein Tech surfaces in 20 mm (¾”), the edge can also be left square and exposed.

  • What thickness for a porcelain kitchen island?

    12 mm (½”) is the reference thickness for countertops and islands; 20 mm (¾”) gives a solid, visible edge and, on the Natura-Vein Tech surfaces, a through-body vein. 

  • Which finish suits a marble-look porcelain countertop?

    Satin is the finish Infinity recommends for kitchen tops: extremely soft to the touch, with a natural, sophisticated look. Levigato Pearl is completely matte and soft, with fine semicircular marks that make each slab unique. Polished brings the veining forward and is mainly used on walls and furnishings.

  • How do you clean a marble-look porcelain countertop?

    Everyday cleaning needs warm water and a neutral detergent. On Levigato Pearl surfaces, avoid alkaline degreasers and abrasive or metal sponges, and remove colored stains such as wine or coffee within two hours.

  • How can U.S. architects and designers get Infinity samples?

    Through Infinity’s Project Division, which supports specification on U.S. projects, and through the partner showrooms located with the Infinity store finder. 

    Talk to Infinity’s Project Division to plan the veining and specification of your kitchen project, or contact Infinity.

Share

Contact us to receive more information

The Infinity team is at your disposal to provide technical support and personalized consultancy. Fill out the form to request product information or start a project with us.