• Infinity Fragmentis Burn GB31 porcelain top against a Fragmentis Row wall

    Custom porcelain table tops: how to choose style, shape, and finish

In contemporary projects, the table is often a commissioned piece. It is designed for one room and sized to its architecture, sometimes in the same surface as the floor or the wall. The table then reads as interior architecture, a volume in conversation with the space. Large-format slabs make this continuity possible.

Written for architects and interior designers specifying custom tables, this guide follows Infinity’s 160 x 320 cm (63″x127″) surfaces as they become custom porcelain table tops: from the style of the project and the shape of the table to thickness, edges, finishes, and care.

Custom porcelain table tops are cut and finished to size from large-format porcelain stoneware slabs of 160 x 320 cm (63″x127″), in 6, 12, or 20 mm (¼”, ½”, ¾”) thickness depending on the surface. Infinity slabs are made in Italy, have very low water absorption, and are suitable for food contact.

FeaturesInfinity slabs
Format160 x 320 cm (63″x127″)
Thicknesses6 mm (¼”) · 12 mm (½”) · 20 mm (¾”)
Composition100% natural minerals, free of glues and resins, sintered at 1,230 °C (2,246 °F)
Water AbsorptionVery low
Food contactSuitable
Finishes for tablesMatte · Satin · Polished · Levigato Pearl · Full Grain · Shantung · Super Natural
ApplicationsDining and coffee tables, consoles, reception desks, and cladding of furniture volumes
DocumentationEPD, Declare label, GREENGUARD Gold, ISO 14001 / 45001 / 17889-1; contributes to LEED
OriginDesigned and produced in Pavullo nel Frignano, Italy, by Infinity (Gruppo Concorde)

What is a porcelain table top?

A porcelain table top is a surface cut to size from a large-format porcelain stoneware slab and finished for a table or a furniture piece. With a 160 x 320 cm (63″x127″) slab, a whole top can be cut in one piece, in the same surface as the floor and walls around it: a single-material interior. Infinity’s porcelain table tops range from dining and coffee tables to consoles and furniture volumes, all cut from large-format porcelain slabs.

How do you choose a porcelain table top for your project style?

Start from the character of the room, then choose the surface. Soft, sandy, and hand-troweled textures suit warm minimalist and Japandi interiors. Travertine and limestone looks bring a quiet warmth, classic Italian veining gives the table the presence of a centerpiece, and full-body stone surfaces turn it into a monolithic block. The table below matches project styles with Infinity surfaces.

Project styleDesign cuesInfinity surfacesFinishes
Warm minimalistWarm neutrals, clean volumes, continuity with floor and wallsSandstone Warm GB11, Sandstone Light GB14 (ARKÈON); Velvet Ivory SE15; Provençale MA10Matte
JapandiLow tables, hand-crafted textures, earth tonesPlaster Ground GB24, Plaster Ash GB25 (ARKÈON)Matte
Travertine and limestone looksQuiet warmth, directional veins, soft reliefTravertino Dust SE16 (ARKÈON); Travertino Trilogy SE14; Fior di Luna SE17Super Natural (Travertino Dust, Fior di Luna); Matte with Natura-Vein Tech at 12 and 20 mm (Travertino Trilogy)
Classic Italian veiningMarble-inspired veins, timeless dining roomsCalacatta Hermitage MB17, Calacatta Magnifico MB16, Arabescato Diva MB29Polished, Satin; Levigato Pearl (Arabescato Diva, 12 mm)
Monolithic stoneMassive volumes, full-body surfaces, mineral fragmentsCeppo Romano SE12; Fragmentis Burn GB31 (ARKÈON)Matte
Statement and organicBold color, flowing forms, tactile reliefRoyal Peacock MB20; Breccia Laurentina MB31; Arabescato Nabuk MB30 (ARKÈON)Polished; Levigato Pearl; Full Grain
Evening and hospitality moodsWarm dark tones, light-reactive surfacesPulpis Brown MB08; Nacra Titanium ME11, Nacra Bronze ME12 (ARKÈON)Polished, Satin; Shantung

Warm minimalist dining tables: continuity with floor and walls

In a warm minimalist room, the table continues the floor and walls. Sandstone Warm GB11 covers wall, floor, and table top in a single surface, its even texture lit by small mineral fragments. Velvet Ivory SE15 and Provençale MA10 carry the same calm into lighter tones, and Matte keeps the top quiet and continuous with the architecture around it.

Infinity Sandstone Warm GB11 porcelain table top on a white drum base
Wall, floor, and table top: Sandstone Warm GB11.

Japandi dining tables: low tops and hand-troweled textures

Japandi interiors favor low tables, natural materials, and textures shaped by hand. Plaster Ground GB24 covers wall and floor, then becomes the top of a low dining table set for floor seating; its earthy, troweled texture brings the warmth of hand-applied plaster. Plaster Ash GB25, on a Plaster Sand floor, sets a round table apart through color alone.

Infinity Plaster Ground GB24 porcelain low dining table, with wall and floor in the same surface
Wall, floor, and table top: Plaster Ground GB24.

Travertine-look dining and coffee tables

Travertine and limestone looks bring a quiet warmth to dining rooms and to the coffee table in the living room. Travertino Dust SE16, in Super Natural, turns cavities and stratifications into delicate micro-reliefs that stay soft to the touch. Fior di Luna SE17 reinterprets a limestone in a cooler, brighter ivory tone, and Travertino Trilogy SE14 carries a directional vein through the body of the slab with Natura-Vein Tech.

In the project. In an island table with cantilevered tops, the directional vein of Travertino Trilogy runs across the top and down the slab legs.

Infinity Travertino Trilogy SE14 porcelain island table with cantilevered tops
Furniture: Travertino Trilogy SE14. Floor: Fossil GB01.

Italian dining tables with classic veining

Marble-inspired veining gives the table the presence of a centerpiece. Calacatta Hermitage MB17 shapes an oval dining top, its white ground crossed by copper veins along the length of the table. Arabescato Diva MB29 carries golden veins across a waterfall table and moves from reflective to soft-touch through Polished, Satin, and Levigato Pearl. Calacatta Hermitage and Calacatta Magnifico MB16 are also produced with Natura-Vein Tech in 20 mm (¾”), which takes the vein through to the edge.

Infinity Calacatta Hermitage MB17 porcelain oval dining table top seen from above
Table top: Calacatta Hermitage MB17.
Infinity Ceppo Romano SE12 porcelain long dining table in a full-body stone look
Table top: Ceppo Romano SE12.

Stone-look dining tables: the table as a block

For monolithic projects, the table reads as a single mineral block. Ceppo Romano SE12 is made with Natura-Body Tech: color and grain run from the surface into the body of the slab, so a long dining table keeps its character along every edge. Fragmentis Burn GB31 brings the same weight with a field of mineral fragments.

Statement dining tables: color and organic forms

When the table leads the room, color and form take over. Royal Peacock MB20, in Polished, shapes an organic dining top in colors inspired by the tail of the royal peacock. Breccia Laurentina MB31 pairs Levigato Pearl with a breccia of almost painterly color, and Arabescato Nabuk MB30, among the latest expressions of ARKÈON, brings the Full Grain finish to a long table with softly rounded ends.

Infinity Royal Peacock MB20 porcelain dining table with an organic, rounded top
Table top: Royal Peacock MB20.

Round, oval, or rectangular: which shape and base suit a porcelain table?

Shape follows the room and the way people gather. A round top brings conversation to the center, an oval or racetrack top softens the corners of a long table, a rectangular top structures long rooms and open plans, and an organic outline turns the table into a sculptural piece. Each shape is cut from a single slab, so the top has no joints.

How large can a one-piece porcelain table top be?

A one-piece top is cut within a single slab. The Infinity format is 160 x 320 cm (63″x127″); the 12 and 20 mm slabs are supplied unrectified, so their outer edges are trimmed before processing. A rectangular top can therefore run close to the slab length of 320 cm (127″), while a round top fits within the slab width of 160 cm (63″). The fabricator confirms the net dimensions of each piece.

Infinity Plaster Ash GB25 round porcelain table top on a conical base, on a Plaster Sand floor
Table top: Plaster Ash GB25. Floor: Plaster Sand GB22.
Infinity Arabescato Diva MB29 porcelain waterfall dining table with continuous veining
Dining table: Arabescato Diva MB29.
Infinity Arabescato Nabuk MB30 porcelain table top with Full Grain finish and rounded ends
Table top: Arabescato Nabuk MB30.

Pedestal, drum, waterfall, and cantilevered dining tables

A pedestal or drum base frees the perimeter for chairs and suits round and oval tops: Plaster Ash GB25 rests on a conical base, Sandstone Warm GB11 on a drum. Waterfall ends take the surface down to the floor, as in Arabescato Diva MB29, and a cantilevered top extends an island into a table, as in Travertino Trilogy SE14. Base, span, and overhang are resolved by the fabricator, with guidance from Infinity’s technicians; avoid heavy point loads near overhanging parts.

Where do custom porcelain tables work?

Custom porcelain tops move from the home to the workplace and to hospitality. In homes they shape porcelain dining tables, kitchen tables, coffee tables, and consoles; in workplaces, reception desks and meeting tables; in hospitality, restaurant tables and counters. In 20 mm (¾”), selected surfaces take the table outdoors.

In open-plan homes, the table often sits next to the kitchen: it can continue the island in the same surface, as in the Travertino Trilogy island table, or stand apart in a contrasting one. For kitchen islands and countertops, see our guide to marble-look porcelain slabs for kitchens.

Living rooms: coffee tables, side tables, and consoles

Lower and closer to the hand, the coffee table is where a surface is read up close. Statuario Principe MB21 shapes a round coffee table on a drum base, with the same surface rising on the wall behind it, while 6 mm (¼”) slabs, including the ARKÈON reliefs, clad cabinets, vanities, and furniture volumes in the same surface.

Infinity Statuario Principe MB21 porcelain round coffee table on a drum base, with the same surface on the wall
Coffee table top and wall: Statuario Principe MB21.
Infinity Fragmentis Burn GB31 porcelain reception desk designed as a single mineral block
Reception desk: Fragmentis Burn GB31. Wall and cabinet: Fragmentis Row GB32.

Workplace: reception desks and meeting tables

In the workplace, the reception desk sets the tone of arrival. Fragmentis Burn GB31 turns it into a single mineral block, and meeting tables can share the surface of the surrounding walls and floors.

Restaurant table tops, bars, and hotel lounges

In restaurants and bars, the table carries the identity of the concept through hours of service. Nacra Titanium ME11 extends from walls to furniture in a restaurant dining room, and Breccia Laurentina MB31 shapes a restaurant countertop in Levigato Pearl. Across the Nacra expressions, Steel, Titanium, and Bronze, the Shantung finish adds a pearlescent iridescence that changes with the light, so the surface shifts from day to night with the room. The surfaces are easy to clean; on Levigato Pearl, colored spills such as wine or coffee should be removed within two hours.

Infinity Nacra Titanium ME11 porcelain walls and furniture in a restaurant dining room
Wall and furniture: Nacra Titanium ME11.
Infinity Breccia Laurentina MB31 porcelain countertop in Levigato Pearl in a restaurant
Countertop: Breccia Laurentina MB31. Wall: Nacra Titanium ME11.

Outdoor dining

For terraces and rooftops, Infinity indicates 20 mm (¾”) slabs, designed for high resistance to weather, UV exposure, thermal shocks, and heavy loads. Fior di Luna SE17 and Travertino Trilogy SE14 are among the surfaces produced in 20 mm.

For outdoor kitchens, see our guide to outdoor porcelain countertops for summer kitchens.

How thick should a porcelain table top be?

Thickness follows the size of the top, how it is supported, and the edge you want to see. Infinity slabs come in 6, 12, and 20 mm (¼”, ½”, ¾”). For table tops, Infinity recommends 12 mm (½”) as the versatile choice; 6 mm (¼”) is the thickness for cladding furniture, and 20 mm (¾”) gives the edge its full depth.

ThicknessApprox. weight of a full slabBreaking strengthApplications
6 mm (¼”)85 kg (187 lb)≥ 900 N (202 lbf)Cladding of furniture volumes
12 mm (½”)150 kg (331 lb)≥ 3,500 N (787 lbf)Table tops, worktops, and furnishing accessories
20 mm (¾”)250 kg (551 lb)≥ 10,000 N (2,248 lbf)Table tops, outdoor applications, and heavy loads

6 mm (¼”). The slab combines lightness with ease of processing and clads cabinets, vanities, and furniture volumes. ARKÈON’s relief textures (Groove, Drape, Cut, Row, Tartan) are available in 6 mm only.

20 mm (¾”). The top carries its own visual weight. Natura-Vein Tech, applied by Infinity to 12 and 20 mm slabs, takes the vein through the full thickness and into every cut, so the edge can stay exposed.

Which finishes suit a dining or contract table?

Matte and Satin keep a soft surface for daily use, Polished brings the veining forward, and Levigato Pearl adds an extremely smooth touch. Full Grain, Shantung, and Super Natural add relief and light to sculptural and evening pieces.

FinishCharacterWhere it suitsCare note
MatteQuiet, continuous with floors and wallsEveryday dining; warm minimalist and Japandi roomsNeutral detergent and a soft cloth
SatinVelvety touch, made with an exclusive Infinity processKitchen and dining tablesNeutral detergent and a soft cloth
PolishedReflective, brings the veining forwardStatement and classic veined tablesUse a chopping board; non-abrasive products
Levigato PearlVelvety, with a delicate reflective effect and faint semicircular marksRefined dining and hospitality tablesRemove colored stains within two hours
Full GrainThree-dimensional micro-reliefSculptural topsNeutral detergent and a soft cloth
ShantungPearlescent iridescence that changes with the lightEvening dining, bars, and loungeNeutral detergent and a soft cloth
Super NaturalDelicate micro-reliefs, soft to the touchTravertine and limestone looksNeutral detergent and a soft cloth

Infinity porcelain stoneware surfaces are heat-resistant, scratch and abrasion resistant, resistant to liquids and acids, easy to clean, and suitable for food contact, with very low water absorption. They withstand sudden changes of temperature, though Infinity still recommends trivets under hot pans and pots, and the color remains stable over time. Full certified values are available in Infinity’s technical documentation.

Sustainability certifications are listed on Infinity’s sustainability page.

How do you care for a porcelain table top?

For daily cleaning, a neutral detergent and a soft cloth are enough; avoid abrasive products, and remove stains while they are fresh. On Levigato Pearl, remove colored stains such as wine or coffee within two hours, and avoid alkaline degreasers and abrasive or metal sponges. Use trivets under hot pans and pots, and a chopping board rather than cutting on the top, especially on Polished surfaces.

Infinity strongly advises against waxes, greasy soaps, water-repellent treatments, and prolonged contact with highly concentrated cleaning products; hydrofluoric acid must never be used.

From slab to table: specifying custom porcelain table tops

Seven decisions define a porcelain table: style, use, size and shape, thickness and edge, finish, base, and sample.

  • Style first: match the surface to the room, from soft mineral textures to classic Italian veining and full-body stone
  • One slab, one piece: a table top cut from a single slab, without joints
  • Shape and base: round, oval, rectangular, or organic tops on pedestal, drum, waterfall, or cantilevered bases
  • Thickness by design: 6 mm (¼”) for cladding furniture volumes, 12 mm (½”) for table tops, and 20 mm (¾”) for a full-depth edge and outdoor applications
  • At the table: heat-resistant, scratch and abrasion resistant, easy to clean, and suitable for food contact

Infinity’s Project Division offers professionals technical and design consultancy, backed by its experience in cut-to-size projects. Talk to the team about your table project.

FAQ – Frequently Asked Questions

  • Can porcelain tables be customized?

    Yes. Infinity custom porcelain table tops are cut to size from 160 x 320 cm (63″x127″) slabs. Surface, finish, thickness, and edge detail are chosen for each piece, which is then paired with a custom base.

  • Which porcelain surfaces suit a Japandi or warm minimalist interior?

    Matte, earthy textures that continue the floor and walls. In the Infinity range, Plaster Ground and Plaster Ash bring the character of hand-troweled plaster, Sandstone Warm adds small mineral fragments, and Velvet Ivory and Provençale carry the same calm in lighter tones.

  • Which table shape suits a porcelain top?

    Every shape can be cut from a single slab. A round top brings conversation to the center, an oval or racetrack top softens a long table, a rectangular top structures long rooms, and an organic outline makes the table a sculptural piece. Pedestal and drum bases free the perimeter for chairs.

  • How thick should a porcelain table top be?

    It depends on size, support, and edge detail. Infinity recommends 12 mm (½”) as a versatile thickness for table tops; 6 mm (¼”) suits furniture cladding; and 20 mm (¾”) gives the edge its full depth. On Natura-Vein Tech surfaces, in 12 and 20 mm, the vein runs through the body and across the edge.

  • Are porcelain table tops heat resistant?

    Yes. Infinity porcelain stoneware is heat-resistant and withstands sudden changes of temperature. Infinity recommends trivets to avoid direct contact with hot pans and pots.

  • Do porcelain table tops scratch?

    Infinity porcelain stoneware is scratch and abrasion resistant. Use a chopping board rather than cutting on the top, especially on Polished surfaces, and clean with non-abrasive products.

  • How do you clean a porcelain table top?

    With a neutral detergent and a soft cloth, avoiding abrasive products. On Levigato Pearl, remove wine or coffee stains within two hours and avoid alkaline degreasers.

Share

Contact us to receive more information

The Infinity team is at your disposal to provide technical support and personalized consultancy. Fill out the form to request product information or start a project with us.